ARES Design publishes the first information of the Panther ProgettoUno supercar Review

ARES Design publishes the first information of the Panther ProgettoUno supercar

Launched at the Concorso d’Eleganza Villa d’Este 2019 event, Panther ProgettoUno has received a lot of attention from customers and car enthusiasts around the world. After nearly a year of launch, ARES Design, the manufacturer in charge of the aforementioned model, has released the operation video and the first details of this retro-oriented supercar.

ARES Design Panther ProgettoUno carries on a retro design with the lines of the Panther produced in the 80’s. This design is mixed with modernized details that make the car more suitable for the time. this point. The outer body of the vehicle is developed by means of electromechanical fluid, which is completely computerized to bring excellent aerodynamics to the vehicle.

The exterior of the car is made entirely of carbon fiber, built on the foundation of the Lamborghini Huracán. It is easy to see the familiar lines of the classic Panther on this model, typically the collapsible headlights with LED technology. The front end of the car is redesigned, folded and angled, with a long front bumper. At the rear of the car, the headlights use LED lights with a design similar to the Chevrolet Corvette Stingray. Dual, symmetrical exhaust system located under the car, high overhang.

ARES Design will equip the new Panther with a set of five-spoke, Vossen-made five-spoke wheels, measuring 20 inches on the front and 21 inches at the rear. Behind the window, one can see the air cavity with the characteristic design of classic Panther cars. Instead of the engine cover connected to the hood like Huracán, the designer has replaced it with a hood with air vents. This is a design commonly used on cars in the 70s and 80s of the last century.

Inside the interior compartment, the Huracan’s signature arrangement is still present but has been completely revised. The rudimentary and classic touches are reflected in the simple square dashboard, the flat bottom 3-spoke steering wheel or the center console with red details, all inspired by the Pantera design. original. Of course, Ares Design does not forget to cover the Panther’s cabin with high-quality materials such as Alcantara, Nappa or carbon fiber. And yet, the company also said it will provide the ability to completely customize the cabin according to the wishes of the car owners so that each Panther is unique.

The ARES Panther engine is also the 5.2-liter V10, taken directly from the Lamborghini Huracán. However, Ares Design did not keep the original parameters, but adjusted so that the engine could produce up to 650 hp, about 10 hp higher than the Huracan EVO while still only need to achieve the amount of tissue- Maximum torque 600 Nm. To do this, Ares Design intervened in the ECU while equipping the Ares Panther with a more efficient exhaust circulation system. Comes with a 7-speed dual-clutch LDF gearbox and a Haldex 4-wheel drive system.

According to the announcement of ARES Design, the Pantera of the 21st century can accelerate from 0-100 km / h in 3.1 seconds before reaching a maximum speed of more than 325 km / h, much stronger than the original. using a V8 engine with technology from Ford. Thus, the ability to accelerate the ARES Panther is only 0.2 seconds behind Huracan EVO (from 0-100 km / h). According to the parameters provided, this car is exactly 1 kg heavier than the Lamborghini Huracán. Holding back the power of this supercar is a carbon ceramic brake system made by Brembo.

Source link: ARES Design publishes the first information of the Panther ProgettoUno supercar

> Wingedwheelblog.com